WhatsNew-Mastercam – Free Download PDF

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Mastercam Help Leave a comment Views. Note: Each viewsheet has a single bookmark. When you save your part file, Mastercam stores the viewsheet settings including the bookmark along with the part.

Comments or questions about this topic? Let us know! Note: When you save your part file, Mastercam stores the viewsheet settings along with the part. Your email address will not be published. Using Читать статью bookmarks Windows 10 hibernate off free a part file into Mastercam.

Mastercam 2018 viewsheets free the Main Viewsheet tab, and select Mastercam 2018 viewsheets free Viewsheet from the pop-up menu.

Mastercam creates a new viewsheet tab for your part. Click the new tab to select it. Right-click the new viewsheet tab, and select Save Viewsheet Bookmark from the pop-up menu. Right-click the tab, and select Restore from Viewsheet Bookmark.

Mastercam restores the settings you saved in Step 6 as long as they are selected on the Settings dialog box. Right-click the tab and choose Разделяю kmplayer for windows 10 download думаю to verify they are active. Double-clicking the tab will also restore the bookmark. Right-click the new Viewsheet 1 tab, and select Rename Viewsheet.

Type a new name such as Isometric Viewand press [ Enter ]. Click the viewsheet tabs to switch between the two views. Related posts: Mastercam Toolbar States dialog box Interface elements in mastercam Toolbar states in mastercam Machine Group Program Settings tab in mastercam Working with mastercam toolpath defaults ew Creating a Doc file mastercam 2018 viewsheets free Key mapping dialog box mastercam. Leave a Reply Http://replace.me/4812.txt reply Your email address will not be published.

Load a part file into Mastercam.

 
 

Error: File not found – pdfFiller

 
You can also now enter 0. Use Edit Spline to refine and prepare splines. Each kit contains tests, quizzes, mid-terms, finals, powerpoint presentations, lesson plans, answer sheets, and more. A number line is a line divided into equal segments. These can be selected from the Planes Manager, or the Status Bar.

 

Mastercam 2018 viewsheets free

 

Right-click the Main Viewsheet tab, and select New Viewsheet from the pop-up menu. Mastercam creates a new viewsheet tab for your part. Click the new tab to select it. Right-click the new viewsheet tab, and select Save Viewsheet Bookmark from the pop-up menu.

Right-click the tab, and select Restore from Viewsheet Bookmark. Mastercam restores the settings you saved in Step 6 as long as they are selected on the Settings dialog box.

Right-click the tab and choose Settings to verify they are active. Tutorial Goals l Gain an understanding of basic Mastercam functions.

WARNING: Screen colors in the tutorial pictures were modified to enhance image quality; they may not match your Mastercam settings or the tutorial results. These color differences do not affect the lesson or your results.

We recommend that you com- plete them in order. Unless the tutorial provides specific instructions on where to place these files, store them in a folder that can be access from the Mastercam workstation, either with the tutorial or in any location that you prefer. All videos can be found on our YouTube channel: www. The tutorial provides instructions for loading the appropriate configuration file. The ribbon comprises familiar con- trols, including a Quick Access Toolbar QAT , tabs, contextual tab groups, galleries, buttons, and the Backstage.

It also features special on-screen controls, and movable, dockable Managers. This section briefly touches on the elements that make up the Mastercam interface to give you a better under- standing of how to use these elements to create and machine your parts.

Goals l Explore Mastercam’s Interface. Or l Launching Mastercam from the Windows Start menu. The following image indicates the elements that make up the Mastercam interface. The corresponding sections provide brief descriptions of each element and its use. The QAT can be located above or below the ribbon. Tab: Groupings of related controls. Tabs are organized in a simple-to-complex workflow from left to right.

Tab Group: A region of the tab that contains a set of related controls. Contextual Tab: A tab that displays when you make a specific selection in Mastercam. A contextual tab presents relevant controls and commands to your current activity. Tooltip: A small window with descriptive text that displays when you hover over a command or control. Selection Bar: A toolbar that combines AutoCursor controls and general selection tools used to select entit- ies in the graphics window.

There are two selection modes, Standard Selection and Solid Selection, which are activated based on the function you are using. AutoCursor controls allow you to detect and snap to locations as you move the cursor over geometry in the graphics window.

AutoCursor becomes active whenever Mastercam prompts you to select a position in the graphics window. Quick Masks: A group of controls that helps you to select all entities of a certain type, or to select only entities of certain type. Most Quick Mask controls are divided in half. Clicking the left or right side of the control toggles between selection modes.

When a Quick Mask control is selected it highlights to indicate the selection mask is on. You can toggle multiple Quick Masks at a time. Status Bar: A bar across the bottom of the workspace that shows the coordinate position of the cursor and provides quick access to modify the Cplane, Tplane, WCS, and Z Depth of geometry and toolpaths in the graphics window.

The right side of the Status Bar has wireframe, shading, and trans- lucency controls that change the appearance of your part. Dynamic Gnomon: The on-screen gnomon allows you to manipulate geometry and planes inter- actively. The gnomon comprises three axes connected at the origin, with selection points that let you choose different types of transformations.

Managers: Managers include controls for toolpaths, solids, planes, levels, recent functions, and Art. The Man- agers can be stacked, docked, floating, or hidden. Use the Toolpaths Manager to generate, sort, edit, regenerate, and post operations.

Use the Solids Manager to edit solids and their operations. Use the Planes Manager to display, create, edit, select, and manage planes and work offsets. Use the Levels Manager to create, select, hide or show levels, and set the active level. Only available if Mastercam Art is installed. Graphics window: The workspace in which you view, create, and modify your parts. The graphics window also displays information about the current measurement system inches or millimeters , and the coordinate axes for the current view or plane.

The icons may vary slightly depending on their location in Mastercam. The QAT is always available and can be dis- played above or below the ribbon.

You can add or remove functions from the QAT. In this exercise you move and customize the QAT. The QAT displays between the ribbon and the managers. The Options dialog box opens. Select Fit in the Commands list, and then click Add. The command appears at or below the selected command in the right-hand pane.

Note that to make items easier to find, the Commands list is in alphabetical order. Alternatively, you can add any command in the ribbon to the QAT by right-clicking the command in the ribbon and selecting Add to Quick Access Toolbar.

Return the QAT to its placement above the ribbon. Exercise 2: Exploring the Ribbon Interface The ribbon interface comprises multiple tabs that group together related functions and controls. Tabs are organ- ized in a simple-to-complex workflow from left to right. Some tabs are contextual and only display when needed in the workflow. For instance, you must select a machine before the contextual toolpath tab displays on the ribbon.

Click each tab to open it, or left click the ribbon and then use the scroll wheel on your mouse to move through the tabs. In this exercise you manipulate the ribbon tabs.

Right-click the ribbon, and select Minimize the Ribbon. View the maximized workspace. Click any tab to display it. Click in the graphics window to hide the tab again. Right-click the ribbon and deselect Minimize the Ribbon to show the tabs again. Click the Machine tab. Choose Mill, Default to select your machine. Note: Available machine types are based on your license and may vary from what is shown in this tutorial.

If Mill is unavailable, select the default machine for a machine type licensed to you. Mill’s Toolpaths contextual tab displays. Click the Expand gallery arrow in the 3D gallery.

The related toolpaths display. Click the Machine tab again and select Router, Default. Explore Router’s Toolpaths contextual tab. If Router is not available, select a different machine type that is licensed to you.

Continue to select different machines and view the related toolpaths tabs. Right-click the ribbon, and select Customize the Ribbon. Select the View tab in the Customize the Ribbon list, as shown in the following illustration. Click New Tab. Select New Tab Custom and then click Rename. Alternatively, you can right-click New Tab Custom and select Rename from the context menu. Select New Group Custom in the list of tabs and click Rename. The command is added to My Group Custom. Select My Tab Custom , and use the up arrow button to position the tab below the Home tab.

Click OK to close the Options dialog box. On your own, return to the Options dialog box to add more commands to your tab, or rearrange the order of the ribbon tabs. You can change the attributes of selected entities in the graphics window using the controls on the Home tab or from the right-click mini-toolbar shown below.

When nothing is selected in the graphics window, you can also set system attributes for the current file using these controls. Alternatively, set system attributes that persist between sessions using the Color and CAD Settings pages of the System Configuration dialog box.

In this exercise, you use the attributes controls located on the mini-toolbar, which is accessed by right-clicking in the graphics window. Right-click the graphics window to open the mini-toolbar and context menu. Click the last button shown in the previous illustration , to pop off the mini-toolbar. You can resize and pos- ition the mini-toolbar anywhere in the graphics window. With nothing selected in the graphics window, click the Line Style drop-down, and choose the style shown below.

New geometry you create will use the chosen line style. Select the Line Width shown below. New geometry you create will use the chosen line width.

Click the Wireframe Color drop-down, and select green as shown below. On the Wireframe tab, choose Rectangle. The Rectangle function panel opens. Click in the graphics window and draw two rectangles of any size.

Follow the prompts shown in the graphics window. Click OK to close the Rectangle function panel. Mastercam creates the rectangles using the line style, width, and color you previously selected in this pro- cedure. Your rectangles may vary from the examples shown below. Hold down your left mouse button and drag to draw a window around one rectangle in the graphics window.

Mastercam selects the rectangle, as shown in the second image below. Click the Wireframe Color drop-down and select purple. Only the rectangle you selected changes to purple as shown in the following illustration. Notice that the default wireframe color has not changed on the mini-toolbar.

Any new wireframe geometry you create still uses the default color, green. Click the last button on the mini-toolbar to close it.

With nothing selected in the graphics window, return the Line Style and Line Width to the options shown below. Return the Wireframe Color to standard blue shown below. Click File, Save. To set default system attributes that persist from session to session, use the System Configuration dialog box and save the settings to the configuration file. See “Working with Configuration Files” on page 51 for more information. The Selection Bar is located across the top of the graphics window. It has two modes, Standard Selection and Solid Selection, which are activated based on the function you are using.

AutoCursor controls allow you to detect and snap to points as you move the cursor over geometry in the graphics window. In this exercise, you locate points and lines using AutoCursor and Fast Point fields. Your file may look slightly different than the one below. Select Line Endpoints on the Wireframe tab. The Line Endpoints function panel opens, and Mastercam prompts you to specify the first endpoint. Click the AutoCursor drop-down and select Midpoint. Click anywhere on the top line of one of your rectangles and drag up to draw a line.

Mastercam uses the midpoint of the entity that you selected as the first endpoint. Click to set the second endpoint. Choose OK in the Line Endpoints function panel. Select Circle Center Point on the Wireframe tab. The Circle Center Point function panel opens, and Mastercam prompts you to enter the center point. As shown in the following image, select AutoCursor Fast Point on the Selection Bar or press the spacebar on your keyboard , to display the Fast Point field.

You can enter numbers, formulas, or X,Y,Z coordinates. Drag and click to set the radius of the circle. The center point of the circle is at 0,0,0. If the entities are outside of the graphics window, right-click and choose Fit. Save your file. Most controls are divided in half. You can select multiple Quick Masks. Hover over each control to view the tooltip describing its function. In this exercise, you select entities using several Quick Mask functions.

Before beginning this exercise, click Clear all masking. Click Select all line entities. Mastercam selects the rectangles and line that you drew in the previous exercise. The circle is not selected because it is an arc. Click Clear selection.

Choose Select only arc entities. Click and drag to window-select all entities in the workspace. Mastercam selects only the circle, as shown in the following illustration. Choose Select all entities by color. The Select All dialog box opens. The Quick Masks, Select only arc entities, and Select only wireframe entities remain selected from the previous steps and affect the outcome. Select the blue checkbox, and then click OK. Mastercam selects only the circle because it is the only blue arc entity.

The blue line is not selected as shown in the following illustration. Select Clear all masking before proceeding with the next lesson. The right side of the Status Bar contains wire- frame, shading, and translucency controls. In this lesson, you use the wireframe, shading, and translucency controls to change the appearance of a part. See Help for information on other Status Bar features. If you see a message for switching units from inch to metric, click OK to allow the change. The part displays as a solid.

Choose Wireframe on the Status Bar. Choose No Hidden on the Status Bar. The part displays as a translucent solid. Continue to experiment with the appearance controls. Note: You can also alter how a part displays using the Appearance controls located on the View tab. Click File, New. You have now completed Chapter 1 of the Mastercam Basics tutorial.

In the next chapter, you learn more about the Mastercam managers. Dock a man- ager to a fixed location on the interface, float it anywhere on the workspace, or even move it to another monitor. Mastercam remembers the settings even after you close the application.

In this exercise, you use different methods to move, hide, display, and customize a manager. Goals l Dock, undock, and move a manager. Exercise 1: Moving and Docking Managers In this exercise, you move and dock one or more managers.

Click the title bar of the top manager, and drag the stack of managers into the graphics window. Drop the managers onto the blue docking icon on the right side of the interface. All of the managers are now docked in the new location.

Click the Planes tab, and drag and drop it anywhere on the workspace except on a docking icon. Resize the Planes Manager by clicking and dragging any of its edges. Click the title bar of the stack of managers, and drag it to the left side of the graphics window, where it was docked at the beginning of this exercise. Note: If you work with two monitors, position the managers onto the monitor that is not running Mastercam to free the entire graphics window for drawing.

Click the Toolpaths tab to bring Toolpaths Manager to the front. Hide Toolpaths Manager by clicking the Close button in its upper right corner. Hide Toolpaths Manager by clicking the Auto Hide button in its upper right corner. Toolpaths Manager collapses against the left side of the graphics window. If you have other managers docked together, they also collapse against the side of the graphics window.

Hover over the Toolpaths tab to temporarily display Toolpaths Manager. Click Auto Hide again to redock Toolpaths Manager. Some managers have different options that are not shown in this exercise. Select Background color from the Options drop-down menu in the upper-right corner of Toolpaths Man- ager. The Color dialog box opens. Select the color shown below. Click OK. The background of Toolpaths Manager is the chosen color. Select Options, Restore default attributes to return the background color to its default setting for the remainder of this tutorial.

You can access one of these functions by select- ing it in the list. In this lesson, you build a recent functions list, resize and dock the Recent Functions Manager, and then access a pre- viously used function. On the Wireframe tab, click Rectangle. Follow the on-screen prompts to draw a rectangle of any size in the graphics window. Click OK when done. Click the Recent Functions tab to bring it to the front. Note that Create rectangle has been added to the top of the list.

On the Wireframe tab, click Line Endponts. Follow the prompts and draw a line of any size in the graphics window. Note that Create Line Endpoint has been added to the list. Click the Recent Functions tab and drag it onto the graphics window. Resize the Recent Functions Manager until only the icons show. This keeps the recently used functions on screen while minimizing the space required.

Click the title bar of the Recent Functions Manager, and drag it to any convenient location on the screen, or dock it on the right side of the graphics window, as shown in the illustration. Click the Create rectangle icon to quickly access that previously used function.

Note that you can press the spacebar to open the last function you used. Follow the prompts to create another rectangle in the graphics window, and then click OK to close the Rect- angle function panel.

Click and drag the Recent Functions Manager to the left side of the interface and dock it with the other man- agers. In the next chapter, you learn more about the Mastercam Backstage. The Backstage is the area where you open, save, con- vert, manage, or print files. You also access the File menu to open System Configuration and set default system parameters, or open Options to modify the user interface. In addition, the File menu provides access to Help, tutorials, software updates, and connects you with the Mastercam community.

This section provides a brief overview of the Backstage and some of its functions. Goals l Open and review the Backstage pages. The image below shows the Info page of the Backstage with links on the left side to other pages and functions. The following section provides brief descriptions of some of the functions and pages located in the Backstage. Click each page to explore the Backstage. You can pin frequently used files or folders to the Recent Documents and Recent Folders sections.

You can pin frequently used folders to the Recent Folders section of the Save As page. ZIP or. Z2G file of the current file that includes your Mastercam con- figuration, machine definition, post files, tool and material libraries and other necessary files. A Zip2Go file is helpful when sharing file information with other users or Technical Support.

Visit this page to check for software updates. Some functions require an active Internet connection. You have now completed Chapter 3 of the Mastercam Basics tutorial. In the next chapter, you learn more about the Configuration files. You can change your system configuration or create a new configuration at any time.

It is easy to switch from one environment to another because each configuration is saved to a separate file. In this lesson, you change options in the System Configuration dialog box to see the different kinds of settings that are stored within one configuration file.

Goals l Create a configuration file. Exercise 1: Creating a Configuration File In this exercise, you create a configuration file. Select File, Configuration to open the System Configuration dialog box. If necessary, select mcamxm.

Since there is currently no geometry, click OK when the following warning appears. Click the Save As button in the lower left corner.

The Save As dialog box displays. Enter Tutorialconfig for the File name. Click Save. Mastercam creates a new. You can create multiple. In the following exercises, you save system settings to this configuration file.

In the System Configuration dialog box, select the Colors page from the list. Select Wireframe geometry from the list. You can see that Wireframe geometry is currently assigned to color 1. It is designed to be used by your non-dominant hand in tandem with a standard mouse for a balanced and cooperative work style. Additional technical and purchase information can be found on the 3Dconnexion website.

Most computers today have some kind of anti-virus software to protect from unwanted malware. In some cases, these have been found to interfere with applications such as Mastercam which are running on the computer. CNC Software does not recommend specific anti-virus products, but if you see unexpected issues, it may be a conflict with anti-virus software. Try temporarily disabling the anti-virus software or setting an exception for Mastercam.

Our global community of Mastercam users, experts, educators, and enthusiasts helps you get the most from your investment. Skip to content. Stay up to date with the latest version of Mastercam. Full 3D CAD modeling. Context-sensitive help available from all dialog boxes. Robust 2D through Multiaxis cutting strategies. Explore Mastercam products including Mill , Lathe , and Router. Intelligent, stock-aware toolpaths.

Complete tool library and custom tool support. Get your free copy of Mastercam Learning Edition today! Request a Free Mastercam Download. Dynamic Motion Extend tool life with proprietary toolpath strategies that maximize material removal rate and reduce cycle times.

Advanced Toolpaths Reduce costs and cut programming time with advanced toolpaths like Deburr and Equal Scallop. Valuable Experience Build your expertise using the CAM software that more schools teach—and more professionals use—than any other. Port Expert.